Welcome to Moniem Tech 5G Knowledge Test Test your 5G Skills! 1. What are the 5G Use Cases? eMBB URLLC mMTC All None 2. Bandwidth parts is a new concept in 5G? Yes No None 3. The modulation schemes in NR are similar to LTE Yes No None 4. 3GPP Initial release for 5G Release 14 Release 15 Release 16 None 5. In 5G Stand Alone (SA), No need for LTE network upgrades No Yes None 6. To optimize signal strength at the mobile device, NR uses a combination of analog and digital beamforming. Yes No None 7. In 5G NSA, Existing LTE Connected mode used Yes No None 8. What is SS block? SS block is initial synchronization signal block. SS block is first block in the Uplink Transmission None 9. 5G gNB can be Splitted to RU,CU and DU No Yes None 10. What is the maximum number of hybrid ARQ process possible in NR? 32 16 8 None 11. What are the different RRC states in NR? RRC Idle and RRC Active RRC Idle, RRC Inactive and RRC Active RRC Inactive and RRC Active None 12. One of AMF Functions in 5G is Uplink classifier to support routing traffic flows to a data network. The Access Stratum (AS) Security control Session Management None 13. One of gNB Functions in 5G is IP header compression, encryption and integrity protection of data. Access Authorization including check of roaming rights Uplink Traffic verification (SDF to QoS flow mapping). None 14. Option 7x is considered as ... 5G NSA 5G SA None 15. The first phase of NR DL uses ... DFT-S-OFDM Cyclic Prefix—OFDM None 16. In LTE-A Carrier Aggregation, a maximum of 5 CCs can be aggregated? Yes No None 17. CA stands for Cellular altitude Carrier aggregation Carrier agnostic None 18. In non-standalone mode, the mobile device uses 4G and 5G networks simultaneously Yes No None 19. In Dual Connectivity Scenario ENDC, LTE eNB acts as Master Node Yes No None 20. 5G mmWave Spectrum frequency Ranges 450 MHz – 6 GHz 24.25 GHz – 52.6 GHz 5 GHz - 10 GHz None Time's up
